Style 840 Tool Cribs
Build tool cribs of any size and configuration with WireCrafters Style 840 Partition System. Construct walls and ceilings from same
modular sized panels. Stack panels to desired wall height and bolt to posts using standard hand tools. Full line of hinged, double
hinged, and sliding doors available. Open but secure design allows free circulation of light, HVAC, and fire suppression systems
throughout secured areas.
RapidWire™ Welded Wire Tool Cribs
Construct strong, contemporary looking, tool cribs with the RapidWire™ welded wire partition system. Stack standard RapidWire
panels between tube posts to desired wall height. Panels are made of tough 1-1/4" x 3" welded mesh, reinforced with steel angle.
Panels mount to 2" square steel posts with self tapping screws. Full line of standard hinged and sliding doors complete the system.
Open but secure design allows free circulation of light, HVAC, and fire suppression systems throughout secured areas.
Style 840 Woven Wire Partitions
WireCrafters Style 840 Woven Wire Partitions can be used to build free standing secured storage areas, security enclosures, or
to divide large buildings into smaller sections. System sets up fast with standard hand tools, secure once in place, easy to
reconfigure as needs change. Open but secure design allows free circulation of building’s lighting, HVAC, and fire suppression
systems throughout secured areas.
RapidWire™ Welded Wire Partitions
RapidWire™ Welded Wire Partition System is the modern solution for plant separation projects. Welded wire panels reinforced
with steel angle stack between tube posts to form the very best welded wire partition on the market. Panels connect to support
posts with clamp system and self tapping screws. The RapidWire™ panel’s welded wire construction allows field modification
with factory finished results. System is easy to set up with standard installers tools. Welded mesh provides strength and versatility
over woven mesh systems. Open but secure design allows free circulation of building’s lighting, HVAC, and fire suppression
systems throughout secured areas.
DEA Approved Storage
When properly installed WireCrafters Style 840 Partitions meet the US Drug Enforcement Administration’s requirements for
physical security of Schedule III through V controlled substances as outlined in Title 21 CFR Sections1301:72-1301.76
physical security controls.
WireCrafters Style 840 partition system can be used to section existing rooms, or create self contained secure enclosures. Control
access to property while keeping it in plain sight with our open but secure design. Mesh openings allow for visual contact with
property while keeping it secure. Also allows free circulation of existing lighting, HVAC, and fire suppression systems. Rooms of
any size or height can be constructed with this system. Customer designed, and standard slide up service windows with fixed
counters are available for issue stations.
Welded Wire Residential Tenant Lockers
WireCrafters' all steel welded wire storage lockers are an ideal way to secure resident's personal items in multi-family building
common storage areas. RapidWire’s welded mesh construction is strong and secure. Plus, it gives installers more flexibility to
custom fit and professionally finish your storage area, eliminating clutter, and efficiently using available space. The locker's open but
secure design allows existing lighting, ventilation and fire suppression systems to function effectively throughout the secured areas.
Military TA-50 Gear Lockers
WireCrafters has supplied TA-50 Military Gear Lockers and other types of Storage Lockers for the demanding requirements of
the military and other government agencies. Officers prefer WireCrafters Lockers because of their modern look, innovative design,
heavy duty materials, and quality construction. These lockers are built to last. Quick to install; rock solid once in place; there is no
better choice than WireCrafters Military Storage Lockers.
Style 840 Woven Wire Physical Barriers
Wire Partitions from WireCrafters are a simple, effective way to protect personnel from the dangers posed by automated equipment. These
barriers are a strong, reliable, and economical solution to plant safety needs. System versatility allows easy integration of access doors or
material handling openings with system controls. Unlike hi-tech devices, this guard is always on duty, unaffected by power outages or
electrical problems. Also doubles as a potential safety net by containing objects ejected by a malfunctioning robot. Crimped and woven
wire mesh is resilient; resists dings, retains its shape, and looks better longer.
RapidWire HD™ Welded Wire Physical Barrier
RapidWire HDTM (Heavy Duty) welded wire partition system is ideally suited for guarding automated equipment. Protect property and
personnel with this modern guarding system. These fully framed welded mesh panels bolt to posts forming a strong, secure barrier around
dangerous automated equipment. Unlike high tech light curtains or switch mats which are subject to electrical malfunction, this system is
always on duty. System offers a full line of hinged doors, sliding doors, and lift out panels, to integrate with your equipment. Simple to plan,
easy to install.
Our years of experience, quality controlled manufacturing, and overall craftsmanship make WireCrafters the preferred
suppler of guarding for many leading original equipment manufacturers. We can economically build the exact guard needed
for your equipment. No matter if it is an integrated part, or a stand alone guard, we have the experience, quality, and desire to
work for you. This arrangement allows you to concentrate on the equipment while we take care of the guarding details.
WireCrafters stocks a variety of meshes to meet requirements for heavy, medium, or light duty jobs.
Style 840 Woven Wire Lift Enclosures
Safe operation of vertical conveying systems requires an enclosure that protects employees from moving parts as well as spilled loads.
WireCrafters Style 840 Partition System’s open mesh design prevents access to hazardous areas without blocking the operator’s view. Style
840 is strong enough to contain most load spills, protecting the operator and other personnel. Also protects people from the lift’s moving
parts. Design your enclosure using standard modular parts. Control access to the lift with any of our hinged, sliding, tunnel, or vertical rise
doors. Any door maybe outfitted with electric interlocks to shut down the system when opened. Doors may be outfitted with standard locks
Install WireCrafters GuardRail in your plant to protect people, machinery, and property from accidents involving forklifts, sweepers, or
other moving equipment. Designed and tested to withstand the impact of a 10,000 pound load moving at 4 miles per hour (GuardRail
Impact Test Report), this protective railing system helps prevent damage to equipment or facilities by providing a strong barrier along aisle
ways, or in front of critical equipment. Create a safety barrier with this competitively priced guardrail system, and save the expense of
costly downtime repairs by preventing the accident with WireCrafters GuardRail.
WireCrafters System 22 HandRail is an industrial handrail that is easy to install. This square steel railing system sets up with standard hand
tools, no welding, no cutting, no self tapping screws. All parts are drilled and ready to accept 3/8" bolts and floor anchors. System is
designed on 8' 0" centers, and comes in a standard two rail style. A 4" high kick plate can be added as an option. Standard rail sections
are 7' 6", 3' 6", and 1' 6" long. These rail sections combine with 6" run post connectors or 4" corner/end posts to lay out on 8', 4', or 2'
centers. To create a complete unit order two rails and two posts.
RackBack® Pallet Rack Backing Panels
Back any rack with WireCrafters modular panel system. RackBack® panels bolt directly to your existing pallet rack uprights creating a
sturdy barrier between inventory and the ground below. Durable all welded, angle frame panels give constant protection from dangerous
spills; protecting personnel while containing inventory. Competitively priced with netting style backing, easy to install, and stock items ready to
ship in 48 hours of your order, RackBack® is the system for you.
Secure contents of existing pallet rack with WireCrafters Rack Enclosures. System uses standard sized panels (and posts-if
necessary) and hinged or sliding gates to enclose any rack system. Enclosure may be mounted directly to rack or free standing.
Wire Partitions & Guard Rails
Central Ohio Division
Established in 1967 as a wire job shop, Wire Crafters, LLC, has grown
to become the nation's leading producer of wire partition products. We
started by concentrating our efforts on one product and developed a
partition system that has changed the industry.
The inherent simplicity and strength of our Style 840 Partition System
opened the door to many new applications for wire partitions. Not only
could that system handle the traditional uses such as tool cribs, secured
storage areas, or maintenance cages; customers liked using it for
machine guards, physical barriers for robotic work cells, pallet rack
backing, vertical lift enclosures, DEA approved enclosures and
As the demand for our Style 840 line grew we added complementary
products, like in-plant Guard Rail, Handrail, and Mezzanine railing. We
also continued to improve the 840 line of partition products, as well as
developed a complementary line of welded wire partitions which we
named RapidWire™ because of its quick ship, fast install features.
DEA Approved Storage
Machine Perimeter Guarding
Pallet Rack Enclosures
|For detailed information on any items listed, contact
Mark McCullough (614)-718-9182
|Mark McCullough (614) 718-9182